Conveyor chain

A conveyor chain is chain that is designed particularly for chain conveyor systems. It includes a series of journal bearings that are kept together by constraining hyperlink plates. Each bearing includes a pin and a bush which the chain roller revolves.
1. Hollow bearing pin chain
Hollow bearing pin chain allows attachments to be bolted through the hollow bearing pins. Attachments could be tightly set or in a ‘free’ manner.
2. Solid bearing pin chain
Solid bearing pin chain has the same dimensions as hollow bearing pin chain but can be better quality and thus suitable for more arduous conveyor applications.
3. Deep link chain
Deep link chain has deeper side plates than the regular chain plates and so provides a continuous carrying edge over the roller periphery. Deep link chain will come in solid and hollow bearing pin varieties.
4. Drop forged chain
Drop forged chain (also called en-masse conveyor chain or scraper chain) has already been fitted with attachments which have been welded directly onto the chain links
Conveyor series roller chains are probably the most trusted types of chains in the globe. For this reason, we stock almost every size and configuration which range from ANSI, DIN, and ISO certified series chains. We also have a full line of stainless steel conveyor chains along with hollow-pin conveyor roller chains.
The most common design of conveyor chain is known as double pitch roller chain. It is because it conforms to ANSI B29.1 specifications and may retrofit most applications. It also offers a low weight to high-strength ratio, an extended service life in most applications, and has a wide variety of attachments obtainable. There are two common styles of this chain. The foremost is the one proven in the picture above on the still left, the second reason is the photo above on the proper. The photo on the proper is oversized-roller dual pitch conveyor chain. This is used since the rollers extend at night side plates creating a simple way to mention content in one location to another. These chains are typically designated with a 2 instead of the second 0 in the part quantities for these chains. Example, C2050 chain may be the standard series and C2052 chain gets the oversized rollers.
Note: Most dual pitch conveyor roller chains are stock in 10ft boxes, 50ft reels, and 100ft reels. Specific cut to duration strands and attachments are availble upon request.


Another most common style of conveyor roller chain is known as the straight side plate or sidebar roller chain. This series fully match ANSI and ISO metric dimensionally apart from having straight part plates. Having straight aspect plates makes this roller chain be capable of carry the product along with it evenly.
· 1
Conveyor chain can handle various goods and system in many fields.
· 2
We are providing an array of Conveyor chain in proportions and feature.
· 3
We are offering best suitable Conveyor chain for your environment of usage
Small Conveyor Chain
Attachment Roller Chain is standard roller chain with attachment assembled.
Attachment Stainless Roller Chain

Attachment Stainless Roller Chain is Stainless Roller Chain with attachment assembled because needed.
Double Pitch Roller Chain

Double Pitch Roller Chain is usually divided into the large roller series and the small roller series, based on the outer diameter of the rollers utilized.
Attachment Double Pitch Roller Chain

Attachment Double Pitch Roller Chain is Dual Pitch Roller Chain with attachment assembled.
Double Pitch STAINLESS Roller Chain

Double Pitch Stainless Roller Chain can work well under tough atmosphere and circumstance which needs high corrosion and temperature resistance.
Attachment Dual Pitch Stainless Roller Chain

Attachment Double Pitch Roller Chain has oval type link plate.
Hollow Pin Chain

Hollow Pin Chain has hollow pin which allows various kind of pins or attachment fit into.
Best Roller Chain

Top Roller Chain may carry goods on the top roller allowing stopping or keeping goods whilst chain keeps running.
Aspect Roller Chain

Side Roller Chain has two kinds of Roller assembly, one is mating and another is staggered. In either case plastic roller might help reducing noise.
Waste materials Oven Conveyor Chain

As being can be used under severe condition, such as ash and water, Waste Oven Conveyor Chain is provided unique design for higher wear resistance.
Case Conveyor Chain

Case conveyor runs the chain inside a casing to convey loads. It can run vertically or on an incline, in addition to horizontally.
§ Material:
§ Configuration:
§ Other characteristics:
• Wide variety of products
• Sizes according to ISO 1275
• Versions with little rollers and transportation rollers available
• All ELITE chain plates 1 are manufactured using processes
such as great blanking and ball-drifting, so a particularly high

Product range:
• Dual pitch roller chains ISO 1275
• Double pitch roller chains with directly plates ISO 1275
• Double pitch hollow pin bushed chains
• Double pitch hollow pin roller chains contact ratio is guaranteed.
• Solid, case hardened rollers 2 with good put on resistance
• ELITE pins 3 are smooth and have an extra hard surface area for increased wear resistance
Model article number:

iwis Leaf chains (according to works regular) are created from accuracy chain parts in accordance to ISO 606. They can be customized and are compliant with the EC Machinery Directive 2006/42/EC.

– iwis hyperlink plates with high tensile strengths
– Pins with extra hardened surface area for high wear resistance
– Precision-formed, heat-treated and shot-peened link plates with optimised geometry
– Higher breaking forces achieved by optimised plate thickness
– Improved press-fitting of pins and external plates for higher exhaustion strength
– Link plates with a particularly high contact ratio
– Pins with hardened surfaces for increased wear resistance
– Special versions produced to works standards available
Model article number: –

Using Ever-power belt joining strand during set up will dramatically extend your belt life! Belt installations that are rushed and improperly made are often the cause of belt breakage and downtime. Ever-power is usually a pre-formed, pre-bent joining strand that requires no bending or weaving during installation. This helps to avoid any weak spots in the belt joint.