Deep Groove Ball Bearing

Deep groove ball bearings will be the hottest bearing type. Therefore, they are available from LYHY in many models, variants, series and sizes. Deep groove ball bearings happen to be versatile, self-retaining bearings with sound outer rings, inner rings and ball and cage assemblies. These sort of bearings happen to be of simple design, durable in procedure and simple to maintain; They are available in single and twice row designs and in open and sealed variants.

In a deep-groove ball bearing, the race dimensions are near to the dimensions of the balls that work in it. Deep-groove ball bearings can support bigger loads. Because of the production technology used, available bearings can continue to have turned recesses on the external band for seals or shields. Due to their low frictional torque, they are well suited for high speeds.

1. Bearing surface is protected with the anti-rust oil first; After that covered with the plastic-type film;
2. Then packed the roller bearings with draft papered specialist belts;
3. Finally, packing the bearings with wood box entirely at the outer packing to invoid the rust or the moist;
4. We can as well packing the bearings relating to consumers’ special requirement;

Top quality steel: Ultra clean steel to increase bearing life by up to 80%
Advanced grease technology: LYHY lubricants that may extend grease lifestyle and performance.
High Grade Balls: Noiseless and smooth procedure even at high speed
Super done raceways: Specially honed to reduce noise and enhances lubricant distribution and your life.
Paten seals: Provide resistance to contamination in the toughest environments
Quality Assured: 100% tests ensures total product quality
Our deep groove ball bearings deliver reliable performance in a wide range of applications and Deep Groove Ball Bearing china conditions. With super-finished raceways and manipulated geometries, our premium design helps ensure consistent quality. Our portfolio features standard, thin section, narrow, large and miniature and extra-tiny deep groove ball bearings that period 3 mm to 400 mm bore sizes. The expanded product line includes a complete supplying of available, shields, seals and snap band combinations.
Its chrome steel engineering helps it be durable and resistant to deformity under heavy loads. The rubber seals on both sides of the bearing hold lubricant in and contaminants out. This single-row sealed ball bearing can be for work with in applications that involve blended radial and axial loads and a dependence on high running reliability at large rotational speeds. Such applications contain clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile equipment, among others.