Pto Adapter

We are committed to research and production of products that meet the increasingly superior electronics industry and are trusted in computers, kitchen appliances, consumer electronics, communications, facts, industry, medical and different fields.
We also offers patent for 360 level AC PIN interchangeable type adaptor in fact it is leading the world’s exceptional design.

Ever-Power provides products which are more compact, lighter, more electric power efficient, and much easier to use.
We selling products all over the world and acquire the certifications for every of country. And in addition acquired ISO9001:2015 and ISO 14001:2015 etc. to ensure products meet the latest regulations.
Gear adapters install between the vehicle transmitting and power take-away, and can serve several purposes. Most commonly, adapters are used to change the path of rotation of the PTO productivity shaft. They can even be employed to space the PTO out and from the transmission case. On some imported or non-SAE normal transmissions they allow for the mounting of standard 6-bolt electrical power take-offs. Gear Adapters are available to match most popular transmissions.
Various body configurations: Can relocate the PTO output shaft to boost clearance for a driveshaft or direct-coupled pump
Adjustments PTO shaft rotation: Fits PTO rotation to that of the driven equipment
Standard and non-standard bolt patterns: Fits SAE standard PTOs to non-standard transmissions

• Frame made of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ steel tubing
• Operates off of skid steer hydraulics
• Requires a minimum of 16 GPM; optimum of 22 GPM (creates 20 to 40 HP off of the power take off)
• No need to modify electricity take off shafts
• Adjustable lower arms
• Reinforced heavy duty universal mounting brackets
• Complete with electric motor, hydraulic hoses and flat faced couplers
• Ideal for three point ability take off products – snow blowers, mowers, tillers, post hole augers, etc

: Over-running clutches provide a safe methods to protect operators and high-priced machinery from conditions when the inertia of PTO influenced put into practice exceeds and over-operates the Pto Adapter china tractor PTO rate. When this happens, the over-running coupler will free-wheel
smoothly and securely. Over-operating clutches will normally hold up against applications needing up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Excessive shock loads or travel line angularity will reduce this capability
If the space of your PTO does not fit perfectly within a tractor, a PTO adapter can extend the size and never have to replace it for a fresh one. This adapter has an overall amount of 7-3/16″ with a man end 1-3/8″ x 6 spline and a female 1-3/8″ x 6 spline end.
Create additional duration on the finish of your PTO. This tractor PTO shaft adapter has got both a female 6 spline end and a male 6 spline end, each end includes a diameter of 1-3/8 in. This allows more connection options and is suitable for anyone that owns an older tractor because the older parts might not be produced any longer and are less common.
The over-running coupler can be an essential part of PTO travel on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit could be required to over-run driving source. The coupler drives solidly from tractor to put into practice and free wheels smoothly when put into practice exceeds tractor PTO speeds. All dimensions are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Needed with 1000 RPM gearcase upgrade or Three Point Hitch package for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter may be the perfect meet for your Shop Dog. It can be conveniently carried in the Shop Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter minimizes the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It has an overall length of 6-3/8″ and is ranked for tractors up to 70 HP.