Helical Gear Speed Reducers
Provide high-efficiency speed reduction through 1, 2, 3, or 4 pieces of gears. Power is certainly transmitted from a high-quickness pinion to a slower-speed gear. Helical gears generally operate with their shafts parallel to one another. The two most common types are the concentric (insight and right angle worm gearbox result shafts are in line) and parallel shaft (insight and output shafts are offset). Single-stage helical equipment reducers are typically used for equipment ratios up to about 8:1. Where reduced speeds and higher ratios are needed, double, triple, and quadruple equipment reduction stages can be used.

Worm Gear Speed Reducers
A single reduction velocity reducer can achieve up to 100:1 reduction ratio in a little package. Known as right angle drives, these consist of a cylindrical worm with screw threads and a worm. With an individual start worm, the worm gear advances only one tooth for each 360-degree change of the worm. So, regardless of the worm’s size, the gear ratio may be the ‘size of the worm gear to 1′. Higher decrease ratios can be created by using double and triple decrease ratios.

Basic Types of Gearboxes

The purpose of a gearbox is to increase or reduce speed. As a result, torque output will be the inverse of the function. If the enclosed drive can be a velocity reducer, the torque output increase; if the drive raises speed, the torque output will decrease. Gear drive selection elements include: shaft orientation, velocity ratio, design type, character of load, gear ranking, environment, mounting position, operating temperature range, and lubrication.