EP 700 Series STAINLESS Worm Gear Quickness Reducers | Ever-Power Gear
The Original Stainless Reducer
The Ever-Power Gear 700 Series Worm Gear Velocity stainless steel worm reducers Reducer has been a foundation in food and beverage applications for decades. As a innovator in worm equipment technology, Ever-Power Equipment continues to improve product performance by developing innovative designs to meet up more stringent demands and anticipated tightening of federal regulations in the food and beverage industry.
Blending trusted 700 Series worm gearing with a forward thinking new exterior design, the stainless steel 700 series has been optimized to withstand the harshest washdown conditions. The units feature reliable 700 Series worm gearing, a 316 stainless rounded housing with smooth uninterrupted areas made to prevent particle accumulation and pooling fluids, dual lipped shaft seals, covers for all hardware and counter bored holes.
NSF Certified Logo
Sure, a stainless gearbox costs more than a painted a single, but investing in a more corrosion resistant gearbox saves cash and makes the most sense in the long run. Unmatched product performance in extremely caustic washdown applications combined with first class customer support makes Ever-Power Gear your first choice for swiftness reducers and gearmotors!
NSF International Certified
316 stainless steel casing, bearing carriers and flanges
303 stainless output shafts
Rounded housing eliminates practically all flat surfaces and prevents foreign matter accumulation or position fluid
Elimination of most exposed hardware promotes simple surfaces to optimize wash down effectiveness
Lubed for life with H1 rated meals quality lubricant Klubersynth UH1 6-460
Flange design incorporates jack bolt holes to facilitate easy motor-reducer separation
5:1 – 100:1 Single Reduction
100:1 – 3600:1 – Double Reduction
Motor flange style incorporates an O-band to reduce ingress of particles or fluids
Polished matte complete maintains clean appearance throughout operation
Optional high pressure washdown seal available
Obtainable in hollow and solid result shaft
Stainless Steel, Heavy-duty Correct angle (SSHdR) series worm gearboxes are created with 304 stainless steel. All reducer surfaces are polished and rounded to avoid organism growth on surfaces. SSHdR series Hollow Output Bore reducers are available in speed ratios which range from 5:1 to 60:1 with imperial center distances which range from 1.75 to 3.25 inches. Also, our stainless steel gearboxes come pre-loaded with EP food grade lubricant.
“EP” series Flange Input – Hollow Bore Result series stainless steel right angle worm gear reducers are stocked as finished goods with hollow result bore sizes ranging from 1” to 2-3/16” with obtainable center distances which range from 1.75 to 3.25 inches. All motor insight flanges are NEMA C-face quill style designs and each unit comes pre-filled with EP food grade lubricant. Stainless Steel bushing kits can be purchased separately to permit for a greater number of mind shaft size configurations.
5:1 – 60:1 ratios
Center distances which range from 1.75 to 3.25 inches
304 stainless housing, covers and flanges
Smooth, polished surfaces and etched nameplate
Internal bladder functions as a breather and effectively dispels heat
Double-lipped VITON oil seals (at output)
15CrMo4 NEMA quill input with carburizing heat therapy
CuSn12Ni2 bronze alloy worm wheel with high efficiency gear tooth configuration
RoHS plastic-type covers supplied to fill unused mounting slots
0-ring provided upon input flange to avoid moisture intrusion
Pre-stuffed with Mobil CIBUS 460 H1 food grade lubricant
Interchangeability with major brands
STAINLESS (SS Series)
Grove Gear STAINLESS gear reducers offer excellent corrosion security. They are rust proof and able to withstand the harshest circumstances. The stainless housing, cover and exterior hardware offer an exceptionally long life.
Center distances from 1.33” through 3.250”.
6 sizes available with ratings to 17 HP.
Available in single and double reduction.
Ratios from 5:1 to 3600:1.
316 stainless steel casing and covers to withstand extreme environments.
Factory-filled with superior Mobil Glygoyle 460 polyalkalene glycol lubricant
Vent-free “sealed-for-life” design with Enviroseal technology.
EP double lip seals provide extended life through increased resistance to temperature, abrasion and chemicals.
O-ring on encounter of input flange offers a positive seal against moisture intrusion.
303 stainless output shaft.
Worms are cut, heat-treated, surface and polished to provide efficient, quiet operation.
All units are 100% operate and leak tested at the factory to insure you get the best quality product.
Ultimate application versatility with all-angle mounting provisions, the widest collection of item bases and flanges and the biggest collection of stock reducer styles.
Mounting measurements are interchangeable with the majority of industry standard reducers.
EP Stainless Steel
Right Angle / Heavy Washdown Duty Stainless Steel Speed Reducer
This STAINLESS reducer is made for DURABLE Washdown applications and is resistant to numerous forms of wear. This is exactly what you wish to use for severe environmental conditions.
STAINLESS WORM GEARBOX
Adhere to HACCP and EHEDG regulations
It is becoming increasingly difficult to get your machine to meet up the HACCP and EHEDG regulations, while your customers vulue this a growing number of. The stainless worm gearbox drive program Ever-Power allows you to stay cost effective but satisfy tcustomer demants.
The Ever-Power stainless worm gearbox types are created to meet the guidelines. Consequently, they are resistant to an intensive cleaning regime, is constructed of hygienic components and so are also dead spots, and horizontal surfaces whenever you can, avoided. Of course, the material of these products is stainless steel.
Output torques of 40Nm up to 160Nm.
Output shaft sizes of 18mm up to 25mm.
Input flanges 63B14a up to 90B5.
Reduction ratios of we=7,5 up to i=100.
Food grade oil, meals grade seals and hygienic design.
Material worm wheel: Cu bronze SN12 Ni2 (UNI7013-10), materials hardened steel worm shaft and ground profile ZI (UNI4760).
Belastingscapacitieiten conformity: ISO.14521, DIN.3996, BS 721, AGMA 6034, ISO 6336, DIN 3990, DIN 743, ISO 281.
STAINLESS STEEL WORM GEAR SPEED REDUCERS
◦ Right angle worm gearbox
◦ Ratio 5:1 to 60:1
◦ Size 206 to 325 (2.06″ to 3.25″ between input and output shaft)
◦ Designed for heavy-duty washdown
◦ Rust free housing, flange, and shafts are ideal for food industry
◦ Ideal for tough environments and corrosive applications
◦ Internal bladder adjusts to warmth and pressure – No dependence on a surface breather
◦ Heat-treated steel worm shaft w/ ground thread
◦ Light weight aluminum bronze (ALBC3) worm wheel
◦ Polished matte finish
◦ Top quality double lip oil seals
◦ Input flange O-band repels external moisture
◦ USDA H1 food grade lubricant : MOBIL SHC CIBUS 460
◦ Appropriate for 56C, 145TC and 182/4TC Engine Inputs
◦ Twelve months limited warranty
Ever-Power Stainless Steel S Series right-position worm reducer is ideal for harsh washdown circumstances in food digesting or other applications with high temperature/high pressure sprays. The S Series comes regular given synthetic oil for lifetime lubrication and is made up of a stainless steel housing that is designed for protection in washdown applications, also made for multiple mounting configurations.
Hygienic stainless BJ worm gearboxes
Ever-Power offers a self-produced stainless gearbox range of top quality. The series was developed specifically for the food industry and other industries where there are continuously stringent requirements for the level of resistance of the material and the easy-to-clean design.
The gearboxes are made from a smooth stainless gear casing, they are lifestyle lubricated and may of course be given oil approved for the meals industry. Essential oil seals are standard made of nitrile rubber.
To reduce the risk of bacterial development, the look is characterised by smooth machined surfaces without unnecessary flanges, recesses and installation holes. It is also possible to order the gearboxes with torque arm, side flange, totally free worm and plug-in shaft. Other modifications are performed on demand including such as for example stainless spindle gears.
In cases where you will want complete hygienic gear engine, we will offer the EP-gearboxes fitted with stainless AC or servo electric motor.
Resistant to cleaning with drinking water under pressure
The protection of the gearboxes is IP65, and for stainless motors it is IP66. This means that the products can be cleaned with water under great pressure from all directions. To attain an overall protection of IP66 by assembly of gearboxes and motor, you must use a gasket of nitrile rubber for the joint. This means that the gear motors are ideal for free mounting without a traditional stainless basic safety cover in areas where hygiene requirements are highest. Hidden sources of pollution can therefore be avoided.
The gearboxes are as standard given a center range of 31, 42, 61 and 99 mm with gear ratios from 5:1 to 100:1 and with an output torque of up to 900 Nm.
Stainless steel worm gearbox
Maximum output torque
5:1 – 75:1
5.4:1 – 75:1
7:1 – 100:1
7:1 – 60:1
7:1 – 100:1
Product selection brochures available below:
Full Integral Horsepower Product Catalog
Worm Product Selection Table
S 45 Series – 0.25 – 1HP, 97 – 450in-lbs, 17.2 – 250RPM
S 50 Series – 0.25 – 2HP, 199 – 567in-lbs, 17.5 – 250 RPM
S 63 Series – 0.25 – 2HP, 209 – 1199in-lbs, 18.6 – 250RPM
S 85 Series – 0.5 – 5HP, 666 – 2353in-lbs, 18.2 – 250RPM
Extra flange and shaft inserts offered and will be requested during product selection. To order, please contact Bison at 1.800.ATBISON (282.4766) and ask to talk with an Automation Specialist. Online selection and ordering coming soon!
Stainless Steel Solutions
Powerful, Clean Solutions with a Stainless Reputation.
Ever-Power Drive’s stainless precision motion gearboxes are designed for sterile manufacturing environments. The product’s smooth surface area and curved contour allows for easy cleaning and bacteria-free surfaces, ideal for meals processing and pharmaceutical applications. The merchandise is designed and rated to IP69k offering maximum protection against contaminant ingress along with leak free operation.
Catalogued models of Ever-Power Gear’s popular stainless steel 700 Series acceleration reducers are now available with standard 2-day delivery. Procedure improvements have yielded the industry’s best standard business lead time for stainless worm gear reducers.
Ever-Power Gear’s SS700 Series, the initial “domed crown” stainless reducers, are designed for maximum corrosion resistance and superior functionality in high-pressure food digesting and packaging washdown applications.
A convenient after hours/holiday hotline can be available for emergency orders. Catalogued SS700 Series models are stocked at local and regional distribution centers to make sure fast delivery.
All SS700 versions are NSF Qualified and also have many maintenance-friendly features including electropolished exterior complete, sealed electric motor flange, and covered hardware. To avoid miniscule niches that can sponsor microbial contamination, the nameplate offers been laser marked to supply a smooth uninterrupted surface area. A large internal oil reservoir, filled with H1 food-grade lubricant (Klubersynth UH 1 6-460) and sealed forever, allows for an array of operating temperatures and extended service existence.
EP 700 Series STAINLESS Worm Gear Quickness Reducers | Ever-Power Gear