Single reduction worm gearing offers high ratio reduction with couple of moving parts in a close-coupled compact drive. The proper angle set up of driving-to-driven machine takes a minimum of space. Input and result shafts can be prolonged in either or both directions in horizontal or vertical arrangements adaptable to any installation requirement. Efficient electric motor speeds are decreased to gradual speed requirements of several industrial machines in a single reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Encounter Adapters or Scoops)
Cast Iron or Steel Housings
Products
The exclusive usage of the involute Helicoid Thread form (with departing side contact) on the worm and gear provides for high efficiencies, and long service lifestyle. The hardened ground and polished alloy steel worm develops a soft, work hardened surface on the bronze equipment. For this reason worm gears put on in and improve with extented service while various other gears are deteriorating. Ever-Power offers a broad collection of model configurations, sizes, ratios, and components from our standard product line.
Fabricated Designs
If the application involves severe shock loads or possible housing damage from external sources (as in steel mills or mobile gear applications) Ever-Power can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide optimum rigidity and strength which allows the transmission of higher horsepower levels than are feasible with standard cast iron units. Extra heavy side plates connect the worm and equipment shaft bearing supports, assuring appropriate meshing of the gear under all load conditions. In smaller sized sizes, fabricated metal reducers are interchangeable with Ever-Power regular cast iron reducers.
Custom Designs
Ever-Power can offer custom worm gear speed reducer quickness and reversed engineered reducers for the application, be it a fresh project or a primary drop-in replacement for a competitor’s acceleration reducer. Fabricated metal reducers enable Ever-Power to complement a competitor’s footprint, centerline, and shaft elevation allowing a primary drop-in replacement saving the client time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are manufactured from phosphorous bronze. Our design also includes a hardened, surface and polished alloy steel worm. This mixture develops a even, work-hardened mating surface of the bronze gear which boosts with prolonged service.
Worm gearing is a course of equipment reducers that utilizes right angle, nonintersecting shafts. This form of reducer provides clean and quiet operation and permits the probability of large quickness reductions. These gears can be found from share in a wide variety of ratios, from only 4:1 up to 3600:1. The small design and construction allows worm gear reducers to be positioned in a comparatively small space. Thus, very high reductions in a limited package size can be achieved with this configuration. Our worm gear features the constant sliding tooth action between worm and the teeth. This increases the tolerance for weighty loads and shock loads. Worm gear drives provide users high reducing convenience of relatively low cost when compared to some other types of gearing.
The use of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that use worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm gear reducer gearbox series foundation on years of experiences uses designed teeth surface with unsurpassed torque transfer performance with great performance, efficency and cost.Worm gear system transmits power through sliding get in touch with, leading to extremely low vibration , noise, small backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for serious impacts. Outer cooling fins and internal lubrication oil diversion channel design to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, after that for precision tooth grinding to make sure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one type of reduction gear box which includes a worm pinion input, an output worm gear, and features a right angle output orientation. This type of reduction gear box is normally used to have a rated motor velocity and produce a low speed result with higher torque value based on the decrease ratio. They often can resolve space-saving problems because the worm equipment reducer is one of the sleekest reduction gearboxes available due to the little diameter of its output gear.
worm gear reducerWorm equipment reducers are also a popular type of acceleration reducer because they provide the greatest speed decrease in the tiniest package. With a high ratio of speed reduction and high torque result multiplier, it’s unsurprising that lots of power transmission systems utilize a worm gear reducer. Some of the most common applications for worm gears are available in tuning instruments, medical assessment equipment, elevators, security gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission offers two sizes of worm equipment reducer, the SW-1 and the SW-5 and both can be found in a variety of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both of these options are manufactured with rugged compression-molded glass-fill polyester housings for a durable, long lasting, light weight speed reducer that is also compact, non-corrosive, and nonmetallic.
Features
Our worm equipment reducers offer an option of a solid or hollow output shaft and feature an adjustable mounting position. Both the SW-1 and the SW-5, nevertheless, can withstand shock loading much better than other decrease gearbox designs, making them ideal for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Reducers also called worm gearbox or worm swiftness reducers. Worm gear reducers are used for speed reduction and increasing the torque for electrical electric motor drives. You can choose to attach your NEMA electric motor to the reducer utilizing the NEMA C face flange or use a coupling. If you want a coupling for the output or input shaft observe our coupling section for selecting a coupling. You can expect four assemblies left hand and right hands and double result shaft and shaft insight and shaft result. Interchangeable with many worm gear manufactures. See data sheet in product overview for diamensions. If you don’t see your type, make sure you Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear speed reducers can be found in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes available on request). Output torque ranges from 33,000 in lbs. for the 7” CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are well suited for water/waste-water products drive applications such as thickeners and clarifiers, which require a vertical straight down shaft. Other obtainable configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or additional process or materials handling systems where huge torques/slower speeds are needed.
These reducers are also available with a helical principal reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM only 0.01 with a 1750 RPM input.
Ideal for ultra-slow quickness, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are used in low to moderate horsepower applications to reduce speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive models are 56C or 145TC flange attach with either right, remaining or dual output shafts or a hollow bore result. The indirect drive models are shaft input-shaft output boxes for make use of with sprocket or pulley drive systems. They offer an effective low priced solution to speed decrease and improved torque, with higher tolerances for shock loading than helical equipment reducers.
In order to select a gearbox speed reducer, you will have to determine the required torque and support factor for the application. Click on “Specs” above for a table that will aid in determining the service factor. For service factors above 1.0, multiply the mandatory torque by the services factor.
Our standard 700 Series – the heart of Ever-Power velocity reducer products – has been serving industry reliably for over 40 years. Its proven modular design has set the market standard for performance and may be the most imitated item in the current worm gear quickness reducer marketplace. But why accept a knock-off when you’re able to have the initial – from Ever-Power.
Specifications
11 basic single reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting flexibility permits installation in virtually any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, in addition to greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
TheIncreased Quality! Industrial Rated! Inexpensive!One-piece gearcase, without exterior ribs, is made from close-grained cast iron and for rigid equipment and bearing support. In addition, it offers excellent heat dissipation.Dual lip, spring-loaded seals protect from oil leakage and stop dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon steel shafts for greater strength.High tensile strength cast bronze worm wheel and hardened and floor alloy steel worm made intregal with the shaft for lengthy and trouble-free life.Oil sight gauge for ease of maintenance (not available on sizes 25 and 34).Factory oil loaded.Every unit test run prior to shipment.Universal mounting with bolt-on ft.Highly modifiable design.All of this at substantially decrease prices than you have been accustomed to paying for reducers of lesser quality. Less